TC-TAG-8 Series
Product Description
Shin-Etsu's TC-TAG-8 series pads are thermally conductive pads designed to thermally connect electronic components to their heat sinks. The TC-TAG-8 series pads exhibit exceptional thermal conductivity and fiberglass reinforcement for superior strength and hardness.
Product Features
- Exceptional thermal conductivity
- 0.20, 0.30, and 0.45mm thicknesses available
- Excellent electrical properties
- Superior strength and hardness
- UL 94 V-0 flame rated
Typical Applications
- Vehicle inverters/converters
- Power Transistors
- Power Modules
- LED Modules
Typical Properties
Type
High Hardness Thermal Pads
Low Molecular Weight Siloxane Stripped?
Y
Density @ 23C (g/cm3)
1.56
Tensile Strength (MPa)
13.00
Volume Resistivity (TΩ·m)
5.40
Dielectric Strength (kV/mm)
50.0
Thermal Conductivity (W/m·K)
8.00
Thermal Resistance (mm2·K/W)
100
Usable Temp. Range (C)
-40 to +180
Reinforced Layer
Fiberglass
Note: Values are not for specification purposes.
Physical properties are typical for the thickness given. Other thicknesses may have slightly varying properties and are available upon request.
Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use.
Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.