SDP-3560 A/B

Product Description

Shin-Etsu’s SDP-3560 A/B is a dual component, room-temperature curing, thermally conductive liquid dispensed gap filler that cures to form a soft, electrically isolating, thermal interface material that fills the gap between a heat sink and the electronic components generating heat.

Product Features

  • Superior thermal conductivity
  • Excellent electrical properties
  • UL-94 V-0 equivalent flame rating
  • Superior reworkability

Typical Applications

  • Electronics applications requiring thermal dissipation

Typical Properties

Liquid-dispensed Gap Filling Rubber
One/Two Component
White / Light Blue
Density @ 23C (g/cm3)
Viscosity (Pa·s)
Mix Ratio by Weight
Cure Conditions
24hr @ 25C
Shore 00 Hardness
Tensile Strength (MPa)
% Elongation
Volume Resistivity (TΩ·m)
Dielectric Strength (kV/mm)
Thermal Conductivity (W/m·K)
LMWS content ΣD3-D10 (ppm)
Viscosity A / B (Pa•s)
98 / 109

Note: Values are not for specification purposes.

Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use. Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.

SDP-3560 A/B

Shipping Info: