KE-3467

Product Description

Shin-Etsu KE3467 is a single component, fast, room-temperature curing material that will form a tough, durable elastomer. KE-3467 exhibits superior thermal conductivity and good adhesion to metal, plastic, glass, and ceramic.

Product Features

  • Superior thermal conductivity
  • Single component
  • Room-temperature cure
  • Low odor and non-corrosive
  • Quick tack free time

Typical Applications

  • Adhering and sealing in a variety of applications requiring high thermal conductivity

Typical Properties

Type
Liquid-dispensed Thermal Adhesives
Cure Type
Condensation
One/Two Component
One
UL Listing
Y
Low Molecular Weight Siloxane Stripped?
Y
Color
White
Density @ 23C (g/cm3)
2.90
Viscosity (Pa·s)
100
Cure Conditions
72hr @ 23C/50% RH
Tack Free Time (min)
4
Shore A Hardness
91
Tensile Strength (MPa)
3.60
% Elongation
30
Lap Shear Strength (MPa)
0.5
Volume Resistivity (TΩ·m)
5.900
Dielectric Strength (kV/mm)
25.0
Dielectric Dissipation Factor
4.0x10-3 @ 50Hz
Dielectric Constant
4.6 @ 50Hz
Thermal Conductivity (W/m·K)
2.40
Usable Temp. Range (C)
-40 to +200

Note: Values are not for specification purposes.

Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use. Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.

KE-3467

Shipping Info: