KER-2910 A/B

Product Description

Shin-Etsu's KER-2910 A/B is a dual component, heat cure LED potting encapsulant that is designed for use in conjunction with Shin-Etsu's KER-2000 DAM/KER-2020 DAM damming materials for LED and COB applications. KER-2910 A/B is a methyl-based silicone product that exhibits an exceptionally high heat resistance for lighting applications.

Product Features

  • Exceptional heat resistance
  • Excellent refractive index
  • Dual component
  • Heat cure

Typical Applications

  • Encapsulating LED and COB components

Typical Properties

Type
Potting Encapsulant
Cure Type
Addition
One/Two Component
Two
Color
Transparent
Density @ 23C (g/cm3)
0.99
Viscosity A (cps)
4800.00
Mix Ratio by weight
100:100
Cure Conditions
1hr@100C + 2hr@150C
Working Time
8 Hours
Shore A Hardness
20
Tensile Strength (MPa)
0.60
% Elongation
240
Shear Strength (MPa)
0.30
Softening Point (C)
-40
Coefficient of Linear Expansion α2 (ppm)
560
Refractive Index (23C/589nm)
1.41
% Light Transmissivity (400nm/2mm)
93
Usable Temperature Range (C)
-40 to +200

Note: Values are not for specification purposes.

Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use. Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.

KER-2910 A/B

Shipping Info: