KE-1850
Product Description
Shin-Etsu's KE-1850 is a 1 part additon cure, high heat resistant, semi-flowable adhesive that shows good adhesion to a variety of substrates. The KE-1850 can be used in environments at temperatures of 200C continuously and temperatures up to 250C intermittantly.
Product Features
- Single component
- Heat cured
- Thixotropic paste
- Adhesion to many substrates
- High range of temperature capability
Typical Applications
- Form-in-place gasketing
- Sealing electronics
Literature
Typical Properties
Density @ 23C (g/cm3)
1.26
Cure Conditions
1hr @ 120C
Tensile Strength (MPa)
2.60
Usable Temp Range
-40 to +200C continuous +250C intermittent
Note: Values are not for specification purposes.
Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use.
Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.