Silicone adhesives have excellent heat resistance, cold resistance, dielectric properties and removability, and of fer good adhesion (pressure-sensitive) to a wide array of substrates. They make ideal adhesives for tapes, protective films and other applications where reliability is key.
Features:
Excellent resistance to heat and cold
Excellent re-release properties
Excellent moisture resistance and chemical resistance
Adheres to silicone rubbers and fluoropolymers
Tape and film with light adhesive types do not trap air bubbles when applied.
Addition-cure silicone adhesives cure at lower temperatures compared to peroxide-cure silicone adhesives.
Typical Properties:
Japan Products
For adhesive tapes
KR-100
High holding power, high heat resistance
KR-130
High tack, reduced low-molecular-weight siloxane
KR-3700
Strong adhesion, easy release from fluoro silicone release liner
KR-3701
High tack, suitable for splicing tape
X-40-3237
Medium adhesion, good adhesion when heated
X-40-3240
Medium adhesion, little or no residue left on substrate after heating, High heat resistance
X-40-3291-1
Adhesive for use on silicone rubber, High adhesion to silicone rubber
For protective films
KR-3704 (X-40-3229)
Low adhesion, adhesion can be controlled when used together with KR-3700.
X-40-3365
Middle concentration version of KR-3704 (X-40-3229), Easy to work with
X-40-3323
Low concentration version of KR-3704 (X-40-3229), Easy to work with
X-40-3306
Very low adhesion, no primer necessary
Additive (Adhesion modifiers)
X-92-128
For improving adhesion
Primers
KR-3006A
For addition-cure PSA, for peroxide-cure PSA
X-40-3501
For addition-cure PSA, specially designed for inline coating
Release agents
X-70-201S
Release agent for silicone PSA, easy-release type
Adhesive
KR-105
Adhesive for silicone rubber
Taiwan Products
For Adhesive tapes (BPO cure)
KRT-001
High tack, strong adhesion
KRT-002
High holding power, high heat resistance
KRT-003
Strong adhesion, easy release from fluoro silicone release liner
KRT-006
Low adhesion, adhesion can be controlled when used together with other KRT-series
KRT-009
Phenyl type, high tack, strong adhesion
KRT-025
Strong adhesion, high holding power
KRT-026
"Medium adhesion, little or no residue left on substrate after heating, High heat resistance"
KRT-031
High silicone content, strong adhesion
KRT-031-lsopa
High silicone content, strong adhesion, BTX-free
KCT-7771
Strong adhesion, easy release from fluoro silicone release liner
KCT-7720
Low adhesion, adhesion can be controlled when used together with KCT-7771.
For adheisive tapes (Addition cure)
KCT-7771
Strong adhesion, easy release from fluoro silicone release liner
For protective films (Addition cure)
KCT-7720
Low adhesion, adhesion can be controlled when used together with KCT-7771.