SV-14005U
Shin-Etsu Silicones of America, Inc.
800-544-1745
Product Description
SV-14005U is designed as an
excellent low durometer molding
material with low compression
set and overall excellent physical properties.
Packaging Information
1,000lb Box
Typical Properties
Type of HCR | General Purpose |
Cure Agent | DBPH Paste (33%) |
Durometer | 42 |
Tensile Strength (psi) | 1550 |
Elongation (%) | 750 |
Specific Gravity | 1.14 |
Tear Die B (ppi) | 180 |
Press Cure/Post Cure | Press |
Cure Time (minutes) | 10 |
Cure Temp. (°C) | 177 |
Cure Temp. (°F) | 350.6 |
Ratio of Catalyst to Material | 1.2 : 100 |
Note: Values are not for specification purposes.
Storage and Shelf Life
Store in a cool, dry place.
Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use.
Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.