SV-14004U
Shin-Etsu Silicones of America, Inc.
800-544-1745
Product Description
SV-14004U is one of a series of easy processing, silicone rubber bases. It can be used in a variety of applications.
Typical Properties
Type of HCR | General Purpose |
Cure Agent | DBPH |
Durometer | 40 |
Tensile Strength (psi) | 700 |
Elongation (%) | 450 |
Specific Gravity | 1.09 |
Tear Die B (ppi) | 60 |
Compression Set (%) | 12 |
Comp. Set Time (hours) | 22 |
Comp. Set Temp. (°C) | 177 |
Comp. Set Temp. (°F) | 350.6 |
Press Cure/Post Cure | Press/Post |
Cure Time (minutes) | 10 |
Cure Temp. (°C) | 177 |
Cure Temp. (°F) | 350.6 |
Post Cure Time (hours) | 4 |
Post Cure Temp. (°C) | 200 |
Post Cure Temp. (°F) | 392 |
Ratio of Catalyst to Material | 0.4 : 100 |
Note: Values are not for specification purposes.
Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use.
Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.