SV-45020U
Product Description
SV-450X0U is a series of platinum-cure silicone elastomers designed for high-performance tubing and a wide range of extrusion profiles. The SV-45020U is mixed with CAT-4002 at a 100:10 ratio by weight to achieve consistent curing and excellent physical properties. SV-45020U is available in durometers ranging from 30 to 70 Shore A, allowing flexibility for applications requiring varying levels of hardness and durability. The series meets USP Class VI and FDA 21 CFR 177.2600 requirements, making it suitable for medical, pharmaceutical, and food-contact applications where purity and regulatory compliance are critical.
Product Features
- Series available in range of durometers from 30 to 70 Shore A
- USP Class VI
- FDA 21 CFR 177.2600
- Easy 10:1 mix ratio
Typical Applications
- High performance tubing
- Medical, pharmaceutical & food contact applications
Typical Properties
Type of Elastomer
General Purpose
Tensile Strength (psi)
1290
Note: Values are not for specification purposes.
Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use.
Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.