Product Description
Shin-Etsu KEG-2001-70 is a very fast cure liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2001-70 is low enough to allow easy pumping through most injection molding systems.
Product Features
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-rings.
- Diaphragms.
- Capping.
- Rubber rollers.
- Connector packings.
- Other electrical parts.
Packaging Information
KEG-2001-70A/B is supplied in 88lb Pail Kit and 880lb Drum Kit, net weight.
Typical Properties
|
Type of HCR
|
Fast Curing LIMS
|
|
Durometer
|
70
|
|
Tensile Strength (psi)
|
1480
|
|
Elongation (%)
|
564
|
|
Specific Gravity
|
1.13
|
|
Compression Set (%)
|
9.00
|
|
Comp Set Time (hours)
|
22
|
|
Comp Set Temp (deg C)
|
180
|
|
Press Cure / Post Cure
|
Press/Post
|
|
Post Cure Time (hours)
|
4
|
|
Post Cure Temp (deg C)
|
200
|
|
Tear Die B
|
223
|
|
Cure Time (minutes)
|
5
|
Storage and Shelf Life
- Recommended storage of this compound is at or below 90°F and in a dry area. If stored as recommended, KEG-2001-70 A & B will have a shelf life of at least 6 months from the date of shipment.
Regulatory Testing
