General Characterstics Purposes and Features

General Characteristics, Purposes and Features

Reactive Silicone Fluids

For an illustration of structural categories, scroll to the bottom of page

Product	Viscosity at 25 ⁰C	Specific gravity at 25⁰C	Refractive index at 25 ⁰C	*1 Functional group equiv.	Organic group	Structural category	Use	Features
Amino-modified
X-22-161AS	13	1.00	1.412	450	-RNH2	2	Textile treating agents. Resin modifiers. Polishes. Waxes	Water Repellency Reactivity Good lubricant properties. Good mold release properties.
X-22-161A	29	0.97	1.411	840
X-22-161B	54	0.97	1.408	1500
X-22-161C	72	0.97	1.407	2300
KF- 393	60	0.98	1.421	360	-RNR'NH2 H	2
KF- 859	60	0.96	1.403	22,500
KF- 860	250	0.97	1.404	7600
KF-861	3,500	0.98	1.407	2000
KF- 867	1300	0.98	1.407	1700
KF - 869	1400	0.97	1.405	3800
KF - 880	650	0.98	1.407	1900
KF - 8002	1100	0.98	1.408	1700
KF - 8004	800	0.98	1.408	1500
KF - 8005	1200	0.97	1.404	11000
KF - 858	25	0.88	1.394
KF - 864	1700	0.98	1.406	3800	-RNH2
KF - 865	90	0.96	1.404	4400
KF - 868	90	0.95	1.403	8800
KF - 8003	1850	0.98	1.408	2000
Epoxy - modified
KF-105	15	0.99	1.422	490		2	Waxes Resin modifiers. Textile lubricants. Paint additives.	Reactivity. Compatibility.
X - 22-163A	30	0.98	1.413	950
X -22 -163B	65	0.98	1.410	1760
X-22-163C	103	0.98	1.409	2780
KF - 100T	19000	.98	1.406	4000		1
KF - 101	2000	1.01	1.437	350		1
X-22-169AS	29	0.99	1.432	530		2
X- 22- 169B	56	0.98	1.412	1.670		2
KF - 102	4000	0.97	1.410	3600		1
KF - 103	6000	1.04	1.455	340		1

*1 The unit is g / mol *2 50% 1 PA soluble acetate

Product	Viscosity at 25 ⁰C	Specific Gravity at 25⁰C	Refractive Index at 25 ⁰C	*1 Function group	Organic Group	Structural Category	Use	Features
Carboxyl Modified
X-22-162A	110	0.99	1.410	920	-RCOOH	2	Textile treating agents. Resin modifiers. Polishes. Dispersants.	Reactivity. Good lubricant properties. Good mould release properties.
X-22-162C	207	0.98	1.406	2330		2
X-22-3701E	3000	0.98	1.407	3800		1
X-22-3710	50	0.97	1.412	1250		-
Carbinol Modified
X-22-160AS	23	0.98	1.422	112*4	-ROH	2	Resin modifiers. Paint additives.	Reactivity. Good mould release properties. Oxygen permeability
KF-6001	42	0.98	1.414	62*4
KF-6002	62	0.98	1.412	35*4
KF-6003	96	0.98	1.410	20*4
X-22-4015	125	0.98	1.408	27*4		1
Methacryl Modified
X-22-164B	58	0.98	1.410	1630		2	Resin modifiers. Paint additives.	Reactivity. Adsorptivity. Oxygen permeability
X-22-164C	94	0.98	1.408	2370		2
X-22-5002	5	0.93	1.418	420		-
Mercapto Modified
X-22-167B	60	0.97	1.411	1670	-RSH	2	Resin modifiers. Paint additives. Corrosion retardants.	Reactivity. Adsorptivity
X-22-980	150	0.98	1.408	1900	-RSH	1	Resin modifiers. Paint additives. Corrosion retardants.	Reactivity. Adsorptivity
Phenol Modified
X-22-165B	160	0.99	1.417	28		2	Resin modifiers	Reactivity
Single End Reactive
X-22-170B	38	0.97	1.406	25	-ROH	3	Resin modifiers. Paint additives.	Reactivity. Good mould release properties. Good lubricating properties.
X-22-173B	30	0.97	1.406	2490
X-22-174D	54	0.97	1.406	4600
X-22-176B	113	0.97	1.408	50
Co- Modified
KF-857	70	0.98	1.410	830	Amino and alkoxy groups	4	Waxes Resin modifiers. Textile lubricants. Paint additives.	Reactivity. Compatibility.
KF-862	750	0.98	1.407	1900
KF-8001	250	0.97	1.406	1900
X-22-3667	3000	1.00	1.426	3800	Epoxy – polyether Co-modified.	1
X-22-3939A	3300	1.03	1.447	2200	Epoxy – polyether Co-modified.	1

*4 Unit is KOH mg / g

Structure
The structures of modified silicone fluids can be divided into four major type as shown below according to their position in the organic group.

Structural Categories

1. Side-chain type
SIDECHAINTYPE.GIF (2560 bytes)

2. Dual-end type

3. Single end type

4. Side chain-dual-end type

Top of page

Back

Shin-Etsu Silicones of America, Inc
1150 Damar Street,
Akron, Ohio 44305-1201
Phone: 800-544-1745
Fax: 330-630-9855