General Characterstics Purposes and Features

General Characteristics, Purposes and Features

Reactive Silicone Fluids

For an illustration of the structural categories, scroll to the bottom of page

Product	TDS	Viscosity at 25 ⁰C	Specific gravity at 25⁰C	Refractive index at 25 ⁰C	*1 Functional group equiv.	Organic group	Structural category	Use	Features
Amino-modified
KF-8010	a	12	1.00	1.412	450	-RNH2	2	Textile treating agents. Resin modifiers. Polishes. Waxes	Water Repellency Reactivity Good lubricant properties. Good mold release properties.
X-22-161A	a	25	0.97	1.411	800
X-22-161B	a	55	0.97	1.408	1500
KF-8012	a	90	0.97	1.407	2200
KF-8008	a	450	0.97	1.405	5700
KF- 393	a	70	0.98	1.421	350	-RNR'NH2 H	2
KF- 859	a	60	0.96	1.403	6000
KF- 860	a	250	0.97	1.404	7600
KF-861	a	3,500	0.98	1.407	2000
KF- 867	a	1300	0.98	1.407	1700
KF - 869	a	1500	0.97	1.405	3800
KF - 880	a	650	0.98	1.407	1800
KF - 8002	a	1100	0.98	1.408	1700
KF - 8004	a	800	0.98	1.408	1500
KF - 8005	a	1200	0.97	1.404	11000
KF - 858	a	25	0.88	1.394
KF - 864	a	1700	0.98	1.406	3800	-RNH2
KF - 865	a	90	0.96	1.404	5000
KF - 868	a	90	0.95	1.403	8800
KF - 8003	a	1850	0.98	1.408	2000
Epoxy - modified
KF-105		15	0.99	1.422	490		2	Waxes Resin modifiers. Textile lubricants. Paint additives.	Reactivity. Compatibility.
X - 22-163A		30	0.98	1.413	950
X -22 -163B		60	0.98	1.410	1760
X-22-163C		120	0.98	1.409	2700
KF - 1001		17000	0.98	1.406	3500		1
KF - 101		1500	1.01	1.437	350		1
X-22-169AS		30	0.99	1.433	500		2
X- 22- 169B		65	0.98	1.412	1.700		2
KF - 102		4000	0.97	1.410	3600		1

*1 The unit is g / mol *2 50% IPA solution as an acetate salt

Product	Viscosity at 25 ⁰C	Specific Gravity at 25⁰C	Refractive Index at 25 ⁰C	*1 Function group	Organic Group	Structural Category	Use	Features
Carboxyl Modified
X-22-162C	230	0.98	1.406	2300	-RCOOH	2	Textile treating agents. Resin modifiers. Polishes. Dispersants.	Reactivity. Good lubricant properties. Good mould release properties.
X-22-3701E	2000	0.98	1.407	4000		1
X-22-3710	55	0.97	1.412	1450		-
Carbinol Modified
X-22-160AS	35	0.98	1.422	120	-ROH	2	Resin modifiers. Paint additives.	Reactivity. Good mould release properties. Oxygen permeability
KF-6001	45	0.98	1.414	62*4
KF-6002	70	0.98	1.412	35*4
KF-6003	110	0.98	1.410	22
X-22-4015	130	0.98	1.408	30		1
Methacryl Modified
X-22-164A	25	0.98	1.415	860		2	Resin modifiers. Paint additives.	Reactivity. Adsorptivity. Oxygen permeability
X-22-164B	55	0.98	1.410	1630		2
X-22-164C	90	0.98	1.408	2370
X-22-2404	5	0.93	1.418	420		-
Mercapto Modified
X-22-167B	55	0.97	1.411	1670	-RSH	2	Resin modifiers. Paint additives. Corrosion retardants.	Reactivity. Adsorptivity
KF-2001	200	0.98	1.408	1900	-RSH	1	Resin modifiers. Paint additives. Corrosion retardants.	Reactivity. Adsorptivity
Phenol Modified
X-22-1821	100	0.99	1.420	32*4		2	Resin modifiers	Reactivity
Single End Reactive
X-22-170DX	70	0.97	1.406	12*4	-ROH	3	Resin modifiers. Paint additives.	Reactivity. Good mould release properties. Good lubricating properties.
X-22-173DX	65	0.97	1.406	4500
X-22-174DX	60	0.97	1.407	4600
X-22-2426	180	0.97	1.405	12000
X-22-176DX	130	0.97	1.409	35*4
Co- Modified
KF-857	70	0.98	1.410	830	Amino and alkoxy groups	4	Waxes Resin modifiers. Textile lubricants. Paint additives.	Reactivity. Compatibility.
KF-862	750	0.98	1.407	1900
KF-8001	250	0.97	1.406	1900
X-22-3667	3000	1.00	1.426	4300	Epoxy – polyether Co-modified.	1
X-22-3939A	3300	1.03	1.447	1500	Amino – polyether Co-modified.	1
Y-22-8645					.

*4 Unit is mgKOH/g

Structure
The structures of modified silicone fluids can be divided into four major catagories as shown below according to the locations of the organic groups..

Structural Categories

1. Side-chain type
SIDECHAINTYPE.GIF (2560 bytes)

2. Dual-end type

3. Single-end type

4. Side-chain dual-end type

Top of page

Back

Shin-Etsu Silicones of America, Inc
1150 Damar Drive,
Akron, Ohio 44305-1201
Phone: 800-544-1745
Fax: 330-630-9855